Infolinks
Guide to the BRC Food Safety Standard
Tuesday, February 15, 2011
The BRC Global Standard for Food Safety certification standard requirements are described in great detail in 7 sections throughout the standard. Some of the requirements may not be appropriate to all organisations; however the standard does stipulate 10 fundamental requirements without which certification cannot be achieved.
1. Management Commitment and Continuous Improvement Clause 1 – Senior management need to demonstrate commitment to meeting the requirements of the BRC standard by provision of sufficient resources, communication, review and taking actions to improve.
2. Food Safety Plan - Hazard Analysis and Critical Control Points Clause 2 – A multi-disciplinary team need to develop a Food Safety Plan based on CODEX HACCP principles that is comprehensive, implemented and maintained. The plan should reference legislation, codes of practice and relevant industry guidelines.
3. Internal Audits Clause 3.5 – There needs to be an effective audit system to verify that the food safety quality management system and relevant procedures cover the requirements of the standard, are effective and complied with.
4. Corrective Action and Preventative Action Clause 3.8 – Procedures need to be in place to investigate, analyse and correct non-conformances critical to product legality, quality and safety.
5. Traceability Clause 3.9 – A system needs to be in place to trace finished products by lot number from raw materials throughout the process to end products and their distribution to the customer. The system should be such that this information can be retrieved within a reasonable timescale.
6. Layout, Product Flow and Segregation Clause 4.3.1 – Facilities and equipment need to be designed, constructed and maintained to prevent contamination of the product and comply with relevant legislation.
7. Housekeeping and Hygiene Clause 4.9 - Housekeeping and cleaning standards need to be maintained to achieve the appropriate hygiene standards and prevent the contamination of product.
8. Handling Requirements for Specific Materials – Materials containing Allergens and Identity Preserved Materials Clause 5.2 – Procedures need to be in place to control specific materials including allergens and identity preserved materials such that product legality, quality and safety is not affected.
9. Control of Operations Clause 6.1 – Procedures need to be in place to verify the effective operation of equipment and processes, in compliance with the food safety plan, so that product legality, quality and safety is assured.
10. Training Clause 7.1 – A system needs to be in place to demonstrate that personnel who can affect product legality, quality and/or safety are competent based on qualifications, training or work experience.
The above guide is not to be taken as a substitute for the BRC Global Standard for Food Safety as Certification cannot be achieved without holding a current copy of the publication.
More Information on
The BRC Global Standard for Food Safety Issue 5
What is New BRC Standard Issue 6
The BRC Global Standard for Food Safety Issue 6 with Checklist
BRC Issue 5 Standard Components
Source: IFSQN
1. Management Commitment and Continuous Improvement Clause 1 – Senior management need to demonstrate commitment to meeting the requirements of the BRC standard by provision of sufficient resources, communication, review and taking actions to improve.
2. Food Safety Plan - Hazard Analysis and Critical Control Points Clause 2 – A multi-disciplinary team need to develop a Food Safety Plan based on CODEX HACCP principles that is comprehensive, implemented and maintained. The plan should reference legislation, codes of practice and relevant industry guidelines.
3. Internal Audits Clause 3.5 – There needs to be an effective audit system to verify that the food safety quality management system and relevant procedures cover the requirements of the standard, are effective and complied with.
4. Corrective Action and Preventative Action Clause 3.8 – Procedures need to be in place to investigate, analyse and correct non-conformances critical to product legality, quality and safety.
5. Traceability Clause 3.9 – A system needs to be in place to trace finished products by lot number from raw materials throughout the process to end products and their distribution to the customer. The system should be such that this information can be retrieved within a reasonable timescale.
6. Layout, Product Flow and Segregation Clause 4.3.1 – Facilities and equipment need to be designed, constructed and maintained to prevent contamination of the product and comply with relevant legislation.
7. Housekeeping and Hygiene Clause 4.9 - Housekeeping and cleaning standards need to be maintained to achieve the appropriate hygiene standards and prevent the contamination of product.
8. Handling Requirements for Specific Materials – Materials containing Allergens and Identity Preserved Materials Clause 5.2 – Procedures need to be in place to control specific materials including allergens and identity preserved materials such that product legality, quality and safety is not affected.
9. Control of Operations Clause 6.1 – Procedures need to be in place to verify the effective operation of equipment and processes, in compliance with the food safety plan, so that product legality, quality and safety is assured.
10. Training Clause 7.1 – A system needs to be in place to demonstrate that personnel who can affect product legality, quality and/or safety are competent based on qualifications, training or work experience.
The above guide is not to be taken as a substitute for the BRC Global Standard for Food Safety as Certification cannot be achieved without holding a current copy of the publication.
More Information on
The BRC Global Standard for Food Safety Issue 5
What is New BRC Standard Issue 6
The BRC Global Standard for Food Safety Issue 6 with Checklist
BRC Issue 5 Standard Components
Source: IFSQN
0
comments
Subscribe to:
Post Comments (Atom)
